LDQ Dielectric Testers Under Moisture / Impurity Environment
In the electrical products under the influence of moisture and
impurity environment, live parts with
different polarities between the live parts and ground metal may
cause insulation on the leakage,
the arc caused by electrical short-circuit or due to the discharge
of the material Electric corrosion
damage, or even ignite lead to fire.
The tracking test is a destructive test of the insulation material
used to simulate and assess the
relative tracking resistance of an insulator during an electric
field and the presence of water
containing impurities at a specified voltage.
For electrical and electronic products, household appliances, solid
electrical insulating materials
and their products, such as: relay sockets, switch cover, contactor
body, etc ... .... Standard: in
line with international GB4207 and GB4706.1 standards in the
"tracking test method"
Function with technical indicators:the use of rectangular platinum electrode, the force on the
sample of the two poles were 1.0 ± 0.05N. The applied voltage can be adjusted between 100 ~
600V (48 ~ 60Hz). When the short circuit current is 1.0 ± 0.1A, the voltage drop will not exceed
10%. When the short circuit current is equal to or greater than 0.5A, , Relay action, cut off the
current, indicating the test sample failed. Drop device can make
drip height of 30 ~ 40mm
adjustable, drip size of 44 to 55 drops / cm ³.
Dropping time interval 30 ± 5 seconds adjustable. Features: The
tester is divided into two parts:
chamber and control box. Stainless steel or brass is used for the
shell and structure of the
The electrode head is platinum (platinum), the corrosion resistance
of flue gas is accurate and
the control system is stable and reliable. Studio: 0.5 cubic